MPGAMMA has all the most important certifications to guarantee its customers a product that meets the highest specific standards.

All products are subjected to continuous resistance tests in order to guarantee the quality over time.

We collaborate with the main certifying bodies, such as TÜV and UL and operates through a quality management system in accordance with the UNI EN ISO 9001:2015 international standards, which is certified by DNV-GL Italy.

Our team of professional welders is qualified according to the UNI EN ISO14732: 2013 and UNI EN ISO9606-1:2013 standards.

UNI EN ISO 9001:2015

UNI EN ISO 14732:2013
UNI EN ISO 9606-1:2013

All products can be employed in accordance with the CEI EN 60529, CEI EN 60204, CEI EN 61439, CEI EN 62208 regulations and meet the required security standards established in the national laws and provisions (DLGS 81/08).

Furthermore, upon request, products which will be installed in potentially explosive environments can come with the ATEX declaration of conformity (ATEX Directive 2014/34/EU).

Thanks to the innovative approach to product certification, it is possible to guarantee the robustness performances protected by the TÜV and cULus marks also on custom realizations.


The IP code (International Protection Rating) refers to the degree of protection provided by electrical enclosures against the intrusion of solid foreign objects and water and is classified in degrees. This code is composed of two digits, each of which has a meaning.

1st digit: protection against the ingress of solid foreign objects and protection against the operator’s access to hazardous parts.

2nd digit: protection against the harmful ingress of water.


The IK code relates to the resistance degree provided by enclosures for electrical equipment against external mechanical impacts, ensuring robustness and safety. This code is made up of two digits that refer to the value in joule of the impact energy. The IK code marking guarantees product quality and trustworthiness.

MPGamma’s products are certified with the C-ULUS Listing, a logo that applies to countries such as USA and Canada. Among UL (Underwrite Laboratory) regulations, the one that applies to enclosures is the UL 508A and 50 which is valid for the American market. The CSA regulations (Canadian Standard Association) C22.2 No 14-2005 and C22.2 No 94- M91 are harmonized with the UL 508A and 50 standards and are valid for the Canadian market.

MPGamma products are suitable to be used in explosion risk hazardous areas, Zone 2 – Zone 22 as per the ATEX Directive 2014/34/EU (acronym for ATmosphères EXplosibles). For electrical or non-electrical use, empty or wired, in the presence of both dust and explosive gases. Specifically the product families SDN and CPN with silicone or polyurethane foam seals. They are also certified for Zone 1 and Zone 21 marked “II 2G Ex eb IIC Gb” and “II 2D Ex tb IIIC Db.”

Please contact our technical department for information.

MPGamma products belonging to the SDN and CPN family with silicone foam seals have also obtained the important international IECEx certification for use in environments classified as explosion hazard Zone 1 – Zone 2 and Zone 21 – Zone 22  marked “Ex eb IIC Gb” and “Ex tb IIIC Db” marking.

Please contact our technical department for information.